MOJOW

- Armchairs and sofas are very resistant when properly pumped.

- To judge the quality of the inflation, the chair or sofa must not be soft, nor must they be hard like a football or basketball. They must be rigid, they must hold you perfectly without sagging, when you settle down, in two words, they must be comfortable. When you press down on the seat with your hand, you should feel resistance.

- During the first inflation, the PVC or TPU, taken out of its packaging, will gradually relax. To provide the necessary rigidity, you may need to inflate it slightly the next day, since the material will be fully "smoothed out".

- A well-inflated armchair can safely accommodate a person weighing 150 kg (resistance of 300 kg for a sofa).

- A good inflation allows a better rigidity of the seat (sofa and armchair). It's the law of physics! In the event of under-inflation, the seated person sees his mass pressing strongly on the welds, since the air contained inside the armchair (or sofa) “compensates” for the weight of said person.

- Proper inflation allows the product to be comfortable.

- Proper inflation allows the product to smooth out quickly.

- Proper inflation allows the product to be more aesthetic.

- In indoor mode once inflated, you will no longer have to re-inflate your MOJOW.

- An outdoor mode, prefer light colors in direct sunlight (white, crystal, orange, pink). Important: light transparent colors have the advantage of allowing the sun's rays to pass through, whereas whites reflect the sun's rays, and thus allow your armchair or sofa to remain relatively cold even in high temperatures. The other colors are more to be placed outside in a shady place. Outdoors in certain regions in the north, at the end of winter, beginning of spring and in the middle and end of autumn, we can have big temperature contrasts during the day, resulting in the phenomenon of air retraction. It's another law of physics: when air cools, it takes up less space! Consequently, if the mattress is perfectly inflated when the air shrinks, it will not present a "deflated" appearance.

MAINTENANCE TIPS

- Our products are designed to last for many years when properly maintained.

- Easy to maintain, they can be cleaned with water, soap (or possibly a window cleaner) and a cloth.

- To enjoy your MOJOWs for as long as possible, we advise you to place them in a shelter during extreme temperatures: below 0°C or above 40°C.

- During a heat wave, we advise you to place your MOJOW in the shade and/or to slightly reduce the inflation.

- If you want to place your MOJOW in full sun, we advise you to choose light colors (crystal, orange, pink, white), the other colors are best placed in a shady place.

- If you place your MOJOW in direct sunlight, we advise you to reduce the inflation pressure very slightly, in order to maintain the comfort of the seat.

- If you use your MOJOW furniture outdoors, remember to put it away in the winter: either brought inside, or dismantled to be stored in its original packaging. It will thus be able to come out in great shape, from the first rays of the spring sun.

- The stainless aluminum structure does not need any specific maintenance. It is designed to be disassembled and reassembled at will if desired, but it can also be wintered outside.

- The SIPO structure made in France is hyper-resistant, it can spend the winter outside. Over time, the wood will gray slightly, like all exotic woods left outdoors. You can, if you wish, pass a high pressure jet, to restore it to its original appearance.

- Colorless transparent products are customizable. In addition to the inflation valves (seats and backrests), the products have a filling valve at the seat level, to integrate the decorative elements of your choice. Children's marbles, feathers, polystyrene, Lego, corks, casino chips, small perfume sample bottles... Let your imagination run wild! be careful not to put more than 2 kg to 3 kg of decorative products inside. Attention easy to insert decorative elements, more difficult to bring them out.